Каталог
Русский
Спецификация

1Z10 - Wall bracket

 

1Z10 - Настенные кронштейны The three slots allow the bracket to be fixed to the wall using M10 fixings.For the fixing to the bracket of mechanical devices, use the specific components of the latter and the 1Z1005 - C fixing clip.
Посмотреть все
LAC Lugano - Teatrostudio The installation operations of a TRX Рельсовая система by means of 1Z10 - Настенные кронштейны.The rail was suspended at the desired height with 100 cm threaded rods that made it possible to overcome the obstacle constituted by an access door to the hall, while ...
... more 25 cm 1Z10 - Настенные кронштейны are fixed to the rail by means of 1T37 - 150 mm Threaded Rods.The last 1Z10 - Настенные кронштейны on the right is the 40 cm long type and it allows fixing a curve.The track surrounds the entire hall and it is intended to support ...
... an Acoustic curtain made up as a matter of fact of 16 wings made of black FMB - Macbeth 400 velvet with пошив вгладь (без складок).The air layer between the velvet and the wall increases the sound absorption properties of the backdrop.The track allows to accumulate or unfold the wings, thus varying the acoustic configuration of the hall.
1Z10 - Настенные кронштейны The three slots allow the bracket to be fixed to the wall using M10 fixings.For the fixing to the bracket of mechanical devices, use the specific components of the latter and the 1Z1005 - C fixing clip.
The 1Z10 - Настенные кронштейны is designed for a simple and safe fixing of various types of mechanical devices and components.
Among those, the track systems (Atlas, TRX, Kompas) for the Греческое открытие of curtains and backdrops.
The fixing distance can be easily and immediately adjusted by sliding the 1Z1005 - C fixing clip along the gap between the two bearing bars.
It is available in 25 and 40 cm lengths.

Each 1Z10 - Настенные кронштейны includes one 1Z1005 - C fixing clip.
Additional clips can be purchased separately.
Материал
сталь
Цвет
matte black, powder coated
Slots
for M10 fixings
C fixing clip
standard hole Ø 8.5 mm
modifiable up to 13 mm to accept M12 fixings
1Z10 250
Длина: 25 см
Excursion: 85 ÷ 234 mm
Вес: 950 г
Максимальная нагрузка: 50 кг
Коэффициент безопасности: 5
1Z10 400
Длина: 40 см
Excursion: 85 ÷ 384 mm
Вес: 1250 г
Максимальная нагрузка: 30 кг
Коэффициент безопасности: 5

Видео и документация

58469_2-1z10_250_datasheet.pdf

58469_3-1z10_400_datasheet.pdf

Этот материал использовался для...

LAC Lugano

Общественные места

Информация о защите данных
Privacy PolicyCookie PolicyНастройки