English
Tubes
for stagecraft
View all
The Tubes for stagecraft with a round section are used to make the Top battens and the Ballast tubes.
The Top battens are bars for hanging light loads, such as borders, wings, light backdrops and screens.
They can be secured to the bearing structures with various accessories, including the 8C50 - Clamp Ø 50 mm + M8 nut.
If movable to be lifted by Manual fly facilities, they are supported by textile ropes usually tied with clove hitches.
The distance between the fixing points depends on the load and does not exceed 3 m.
Top battens of various lengths can be made by joining the segments with their connectors, normally without exceeding 12 m, in which case they require at least 5 suspension points.
The Tubes for stagecraft are also used for the Ballast tubes to be inserted in the bottom pocket of backdrops and screens, these too to be joined with connectors, with no length limits because they are supported by the backdrops themselves.
Upon request, the Tubes for stagecraft can be curved and enamelled.
The Top battens are bars for hanging light loads, such as borders, wings, light backdrops and screens.
They can be secured to the bearing structures with various accessories, including the 8C50 - Clamp Ø 50 mm + M8 nut.
If movable to be lifted by Manual fly facilities, they are supported by textile ropes usually tied with clove hitches.
The distance between the fixing points depends on the load and does not exceed 3 m.
Top battens of various lengths can be made by joining the segments with their connectors, normally without exceeding 12 m, in which case they require at least 5 suspension points.
The Tubes for stagecraft are also used for the Ballast tubes to be inserted in the bottom pocket of backdrops and screens, these too to be joined with connectors, with no length limits because they are supported by the backdrops themselves.
Upon request, the Tubes for stagecraft can be curved and enamelled.
8TA 050-20 - Aluminum tube with round section Ø 50 mm
external Ø
internal Ø
internal Ø
50 mm
46 mm
46 mm
thickness
2 mm
length of the bars
600 cm
weight
815 g / m
8TA 030-15 - Aluminum tube with round section Ø 30 mm
external Ø
internal Ø
internal Ø
30 mm
27 mm
27 mm
thickness
1,5 mm
length of the bars
600 cm
weight
370 g / m
8TF 34 - Galvanized iron tube with round section Ø 28 mm
external Ø
internal Ø
internal Ø
27,75 mm
23,05 mm
23,05 mm
thickness
2,35 mm
length of the bars
600 cm
weight
1.410 g / m
Availability
by the piece
This material was used for...
Ad Hok [adhɔk]
Commercial premises
Bétonsalon, ''Hier revient ...''
Exhibitions, art, architecture
Laura Pausini, ''Greatest Hits World Tour''
Concerts
María Pagés, ''Utopia''
Dance
Massimo Ranieri, ''Sogno e Son Desto 500 volte''
Concerts
Michel Sardou, ''Bercy 2001''
Concerts
Polyvalent Center of Brusaporto
Curtains for multi-purpose settings
Renato Zero, ''Amo Tour''
Concerts
Tableau vivant
Theatre ''di figura''
Teatro dell'Opera dei Pupi
Curtains for historical theaters
Teatro Sociale Bonoris
Curtains for historical theaters